Thursday, January 12, 2023

01.12.23 How 'bout them girls...



     It was a proud-to-be-a-Dad birthday for me this year. I'm always proud of my kids as they navigate life but on my 55th it was all about the two youngest. First it started with Lauren, who's wrapping up her studies for automotive technology. So when my 2002 Silverado started signaling there was something going on with the rear brakes it was Lauren to the rescue. 


     "Just come after work and I'll take care of it". So a little after 5 o'clock and when the shop staff headed home Lauren went to work. Up on the lift, remove the wheels, a quick diagnosis and after a 


few hours of greasy and knuckle damaging work it was done. Above are the rotors, right is bad in need of replacement, and the left, well, it was worthy for whoever came past to take a picture of it....."I've never seen one so bad". And since it was so far gone the brake line and caliber needed to be replaced as well. It's funny the brakes didn't screech and they worked fine unitl I lost them the morning Lauren hooked me up. "Now girls can do anything guys can do better"...and I'd be proud if it were one of the boys, but it's kinda cool having a daughter who turns wrenches and can help an old man out. Especially since auto repairs are as hard for me as tying up a Beast Fleye. 




     And then last night it was Erin's turn to make me proud. She's showing signs of being a chip off the old block with an interest in EMS and then nursing. She wants to be a trauma nurse....perfect. So last night we signed her up for her first EMT class which is being held at the Keyport First Aid 



Squad. In 1990 I took my first EMT certification class, above is my UMDNJ ID from 1992, and I think it might have been 60-80 hours, now it's 240, and is two nights and a Saturday every week until May. It kinda big-girl stuff as it's her senior year and she'll have to sacrifice a lot of time and extracuricluar activities to get it done. After that is was a birthday Guiness as McDonagh's Pub and

some converation with Erin sharing my own journey in emergency service through my early days as a volunteer in the Middletown Fire Department, then Newark Fire, UMDNJ EMS and then all the various nursing gigs that I have had. In a year or so I wouldn't be surprised if she's in the nursing program where I now teach....and that would be very cool. 

     I also shared with her about always being ready to help. She is amazed about, "How do you always find these things?. So for Christmas Santa brought her her very own first aid/trauma kit to keep in her car when it's go time. So she's good to go to help someone until others arrive. And in the "How do you find these things?", yesterday was no different. I had just hung up the phone with Leif after a long conversation of fishing and fly tying and was heading north on Route 129 when I looked over and said to myself, "Somethings on fire over there"... 


     I made a left on Cass Street and then a right onto Grand Street and said, "Holy shit (no pun intended) the church is on fire". There were no cops, no firemen, only a chiefs car which headed to a different street. I was like okay game on and looked for a spot where I could ditch my truck and not

get blocked in by this soon to be conflagration. But quickly I saw it wasn't the church but the rectory which belonged to St. Mary's Byzantine Church. As these big city churches dwindle in congregation size and the schools go out of business it's not uncommon for the diocese to rent out space and buildings, and that was my guess here as I didn't see nuns or priests pouring out of the building.


     So just as I thought it was go-time I heard the commotion from the opposite side of the building and then in an instant the smoke started to turn white as water shot out the top floor windows. The boys had just made the top floor and opened the line from the front door. I shared that story with Erin, and about always being ready to stop and jump in, and get to work doing good for somebody else. You can't always wait for someone else to act. 

     In between all of that fun I was with my nursing students during the day who are working hard to get through the program in order to be in a position to help others. There's just something about service to others, be it replacing their brakes, doing CPR, passing meds, or running through a burning building that really does the mind and body good. I got to see a little of that over my birthday, and along with a pint and a half of Guiness it was a really good day. 

Wednesday, January 11, 2023

01.11.23 Gettin' closer....


     Again, just tying without thought. Maybe that's the best way for me. Just sit down and grab some materials and tie. I've been tying for many years, not trout flies for sure, but a lot of horrendous salt water flies over the years. So today, on my birthday, at age 55, maybe it's starting to click. Below is a shot of me struggling through tying a fly at the Orvis NYC store on March 31, 2012. I was there doing a presentation and was asked to sit down and tie up a few flies. You can see how this one was turning out..... (that when Clear Cure Goo was all the rage until it folded in 2014.) 


      So the top picture and the one below are the results of, I think, a job pretty well done. Don't be fooled by the ass-end taper, it hasn't been wet down yet and should fall into place. There's a mono extension in there so that's probably a little bucktail that needs to be tamed. I think those 8-10"s are the perfect length fly for what I need. They're not Beasty, but do kind of follow a herring profile. 


     On the one below I passed on a mono extension and tied in some feathers. They should really do a nice dance when they hit the water. Even the subtle mix of colors works, and there's black down the back which you can't really see in the picture. And not to get too-Squimished up I reached into 


my selection of SF Blend and tied one up for the 3rd shift fishing. What I don't have is any good  soft and long black bucktail on hand so I'll have to run down to Brad before the shows start and see if he has any. I do have plenty of Steve's blend so that's what I'll use for now. After looking at the below fly I went and cut back tapered the flash better as the ends were all the same length, not that I think a striper would care. That's a 6/0 Mustad so it approaches almost 9 inches when taped out. 


     One thing I've never had is a true rotary vice. I use a Regal Medalion and would like to upgrade to their Revolution model one day. One thing is for sure, the fly side that faces me always seems to come out the best. I need to get to a show soon, tying materials and supplies, outside of the eyes, are dwindling. Just about 3 weeks until The Fly Fishing Show in Edison, I hope it's good this year. 


 

Tuesday, January 10, 2023

01.10.23 Interesting where the fish are now....


     I think this mild winter, hopefully not jinxing it by saying that, is playing games in my head, along with anyone else that fishes for striped bass. There's other fish in the sea and the tog guys are having a hoot out there and enjoying 50 and 60 degree days on the boat as they dangle crabs over the wrecks. 

So where are the striped bass now?


     While I haven't been out fishing in the salt waters others have so it's nice to have some idea what is going on. As you know we are having a mild winter so far and I wonder how that effects the bait and striped bass migrations. I have checked the following buoy readings from NOAA, Station 44065 which is 15 nm south of Breezy Point 46 degrees, Station ACYN4 Atlantic City, 43 degrees, and Station 44009, down off Delaware 26 miles south of Cape May, 47.8 degrees. While south Jersey has seen their steady action of striped bass decline over the years there may be something going on this winter. Now Cape May and Atlantic County do get theirs, Cape May known for their backwater bite and the Delaware Bay fishery in the spring when the bass go up and down the Delaware River, and Atlantic City, yep that jetty, and Brigantine across the way, where there must be a magnet on the bottom leading into the Absecon Inlet that attracts striped bass in the spring. 


     There's a charter operation, Stalker Fishing Charters out of Cape May, who have been on the bass since they left us up here in north Jersey at the end of December.  Above is a sscreen shot of their fishfinder on the bass. They have been reporting daily of fish from 30 inches to 30 pounds both rolling on the surface and throughout the water column. They are fishing with sight of the beach and within the three mile line. While their videos show the rolling, they don't show gannets diving like we see when herring are out and about. I was thinking that maybe due to the unseasonably warm temps the herring were staged early outside of the Delaware Bay and the bass, either Delaware or Husdon River strain bass were staying put and eating before the spawning migration. 


     So As I tried to figure out the Cape May thing going on I started to think about the Chesepeake Bay and striped bass. I know 0% about the Chesapeake, only that striped bass come from there, Maryland sucks ass when it comes to protecting striped bass, and pollution has wreaked havoc on spawning and summering over habitats. To be honest, and I am geographically challenged, I had to look at a map and really see what the Chesepeake really means. 


     Being a student of the striped bass game has me doing a lot of reading and searching online which includes social media. I can't help but follow Chuck "Tyman" Many who is from New Jersey and is probably one of the best big bass fisherman out there. I can't even count how many 50 + pound bass he catches each year between New Jersey and down off of Virginia and in and around the Chesepeake Bay. I know he does a lot of work tagging fish for research. Cape Charles, which is on the northern side of the entrance of the Chesepeake seems to be where a lot of anglers lauch from. 

      But I started to look at the map of the Chesepeake. The Susquehanna River is at it's northern border, the Chesepekae and Delaware Canal connects the CB to the Delaware River below Wilmington and then tributaries that are spwaning grounds that run off the bay. To note the CB is about 4,500 square miles, and in comparison Newark NJ is about 25 square miles, so you can see how expansive a body of water it is. 

     Rivers that are spawning grounds are the James, York, Potamac, Choptank and Nanticoke, I am sure some of the smaller rivers contribute as well. They say the Chesepeake contributes 70 % of the striped bass to the East Coast biomass, followed by 30% from the Hudson River, 10% from the Delaware River, a few % from the Roanoke/ Albermarle Sound, and then smaller amounts in rivers up and down the coast. Some will say smaller rivers like the Navesink and Raritan Rivers in New Jersey and the Connecticut River in Ct. contribute, although that has not been confirmed. It is interesting that in 1879 132 striped bass were trucked across the country to California which quickly multiplied and was the foundation of that fihsery out there. One question up for debate always is, where they Navesink bass, or Hudson River strain bass? We'll never really know. Below is a map of the Albermarle Sound in North Carolina, with the Roanoke River off to the left. 


      Striped bass, like other anadromous fishes like herring and shad, spend thier lives in the salt ocean water and return to their natal freshwater to spawn. Eggs must be laid and fertilized and begin their lives in freshwater, at first, and after hatching, the larve, fry, and immature fish grow before riding the currents down into brackish waters before heading out to the ocean. Fertilized eggs and salt water don't go toegther well as osmosis, the movement of salt and water from high to low concentrations, will cause a fluid shift and swell and kill whats inside a fertilized egg. 


     The Delaware is 330 miles long and striped bass have been caught up as far as, just let's say, Junction Pool in Hancock, where the East and West Branches meet to form the Mainstem. Down river they can congregate, maybe even winter over, in deep sections like Narrowsburg NY where the depth is over 100 feet deep. As they migrate to spawn they follow other anadromous fishes like the shad and the river herring, and that is what I see in the Delaware from mile marker, just an estimate 120- 140, with Trenton being mm 130. A look above shows where the salt line currently is, somewhere around mm 70, about where Wilmington Delaware is located. 


     One of my goals this spring is to find, and either photograph or videotape, Delaware River striped bass while spawning. When I ask the most experienced Delaware River anglers not one has reported seeing it first hand, although there was report from one that they saw acres of bass spawning in Burlington County last year, but they didn't haver a camera. The image above is from the Miramachi, in Canada, which is becoming it's own world-class fishery for striped bass. Some up there say striped bass are a nuciance since they are decimating the salmon populations in the rivers. 

     It's fun to expand your knowledge about things, but casual reading or report stalking isn't the same. If I wanted to try and learn the Chesepeake I would have to send time, a lot of time, both on the road and on the water. Trenton NJ to Harve de Grace Maryland is just under two hours. And then once I got there, now what. I think for me, just being able to read about that fishery, and the importance of that body of water, can help me understand the whole picture better. 


     Alan Battista, above, kayak angler and author, has penned three books about catching big bass in the Chesepeake. I plan on ordering one of his books to get a better understanding of the Chesepeake and that fishery. 


     So now what? It looks like winter is going to start to show this week and for sure cabin fever will really set in. The shows are coming soon which will help as will more time at the vice getting ready for spring. But if you believe that migratory and pre-spawn striped bass get going in March then it's only like 50 days away, so where are they in the meantime? Are they staging now, in what seems like decent 45+ degree waters just outside of the Delaware and Chesepeake Bay? Are the Husdon fish still in the Raritan and Lower New York Bay and New York Bight, holding out before heading out into the deeper ocean or up into the deeper waters in the Hudson near West Point if winter were to come crashing down on the East Coast? 


     I don't know, don't know if I'll never know, don't know if I knew if it would really matter, but these fish are a mystery, they are amazing, and for some reason become an addiction. 

Sunday, January 8, 2023

01.08.23 Got some new eyes in the mail...


      Yesterday my email let me know a packaged was delivered. Last week I did a search and found some 3d tab eyes on eBay. I ordered the 10 mm eyes, 180 count for less than $15. Remember the cost of those 12 packs back in the day. 


     I liked what I saw out of the package and dropped down into the vice to tie up a fly and try the eyes. These are the 10's and as soon as I saw them I went back and ordered the 12 mm's. Now the tabs are, well, not the strongest, but you can tie them in easily, the tapered point helps. I have used solid plastic 


tabs that you adhere an eye to. Funny is, Mike sent them to me last February, and as I was writing this he called me to talk about....tab eyes. You can see below what he sent me, 





     The other day Ru Harvey, a fantastic tyer from across the pond, posted that he now has a line of tabs he markets for the fly tyer. I am sure they are a little more "hardy" than the tabs that are connected to the eyes that I purchased. The beauty of tab eyes, like Ru's, is they dont' have to be glued to the head of the 


fly, which can then change the look and action of the fly, it almost becomes compressed as you apply pressure withyour sauage fingers and a tab eye loaded with Superglue. Below is a video Ru dropped on how he ties his eyes in,



     For some tyers eyes are overrated. Bob Popovic's is all about the profile and taper, while others, like Ben Whalley, tie with eyes. Below are a few of his masterpieces. It looks like he uses a tab-eye-mask. I have seen them, where there is a cut out for the hook eye that swallows it and makes both sides even on the fly. I would like to findthem and give them a shot, as tying tabs in isn't always easy or pretty. 



     Some say eyes are more for the tyer and fisherman then for the fish themselves. I like the way they look, especially on the bigger flies. At times, when you look down while swimming a fly, the eye is what jumps out at you. I think the fish can key on that also, and maybe even guide them on how to go about swallowing a fly face first and whole. 

     Below is where I got the eyes off of eBay, they came from the seller in New York. Enjoy!






 

Saturday, January 7, 2023

01.07.23 A Beast, a good one, is coming...


     Looking good, but maybe a little torpedo like. This give's me a dozen of pretty much the same fly, plus the Beast attempt. This one is keeled and I broke out the Plastic-Dip just to stiffin in up a bit. 


     While looking through some tubes and envelopes I found an old Andrew fly tucked inside. I ran it through my fingers and was contemplating breaking out my latest disaster for comparison. No need for that. One thing is for sure, Andrew, and the other guys who has mastered the Beast, must pick


out the creme of the crop when it comes to bucktail. This stuff could put you to sleep if someone fanned your face with it as your laying there on the couch. No big hollow fibers, no stiffness, and really a perfect diameter which kaes it easier to reverse tie in. So I staretd looking at his technique.


     This fly has 10 ties on the mono extension and then 4 more on the hook itself. Just a hint of color inside and some olive gives it enough of a contrast to really make it pop and look like something edible. I can't imagine trying to manage my fingers tying in 10 reverse ties on an extension. Each one is sparse, but all together just looks perfect. I think he's tied this one up on a 4/0 Predator hook. I'll keep tying away, and try and get away from the torpedo shaped flies I've been banging out. 



 

Friday, January 6, 2023

01.06.23 One of my favorite pictures....


      I dug out some of the hard rives looking through some old images getting ready for, possibly, a few upcoming talks. I foudn the above image which really illustrates what surfcasting "Jetty Country" used to look like. I remember that day and walking up there with a fly rod trying to get in on the action. It was like Joseph looking for a bed for Mary and Jesus, "Sorry, no room here". You can read about that day HERE.

     What is incredible is the amount of images I have dating back to 2009 when I started this blog. Now, not only do I have 1,000's of images that I selected and "developed" and posted, but 10,000 images that didn't make the cut. So in each folder is a RAW folder, a SELECT folder, and a TRANS (meaning transmitted) folder. Say I posted say 6 images, there were tens more from that day. Looking though them there's pics of guys I don't see anymore, Steve the Lawyer "Scales of Justice" who loved Brighton and Whitehall, structures not there, like the Pier at Phillips Ave, and of beaches totally destroyed by beach replenishment, aka "The Hump", and everything around it. Check out the image below and weep, can you figure out exactly where that is...that was Jetty Country. 





Thursday, January 5, 2023

01.05.23 Is a bad Beast better than no Beast?.....

 


     That is the question! So I'm making good progress with the Squimpish tied flies. Feeling a little swaggerish so I decided to go all in and break out the bucktail and tie a Beast Fleye.....maybe I shoulda stayed with the synthetics....


    I dug through the hook bin and found a pack of Gami's in 6/0 and Owner's in 5/0. I went with the larger hook. I knew in order to tie a good Beast, or really a bad Beast, I would have to have somewhat straight mono for the extension. So I boiled up some water, dropped some peices in, and then worked them into some kinda straightness. Then away I went to the fly tying lair. 


     After about an hour of pure hell and 10 tie-ins I finished with some eyes and marveled at it. WTF is wrong with me? Why can I not get this fly down? Maybe this one would get better after a bath, or maybe after I lit it on fire. So off it went under the faucet, there is would surely just morph into what 


a Beast is supposed to llok like, well it wound up looking pretty horrible after that. Now with air temps in the 60's and the Big D across the street I figured why not a field test. I drove down, tied it on, and let it fly. And you know what? Not all that bad, not perfect by any means, but......well I'll shut up.


The big question is? Is a badly tied Beast Fleye better than not having one at all. I didn't video it because I hate the low-res finished product like in yesterday's post but it really wasn't all that bad, in fact, I 100% guarantee a big fish, over 30 inches will eat that this spring. It happened last year with 


a bunch of subpar Beast's I tied. Things I tried to do right. Spacing. Not to much material. Right taper, hah on that. A different colored head, I love the back natural part of the bucktail for fly heads. And, 

the eyes always have it from me especially on herring flies. Back in the war room I keeled the fly with some lead on the bend of the hook and tucked it away with the other ammo I'm making for March 1st, which is only 56 days away. It will be here before I know it. I've been in contact wih my river buds and they are chomping at the bit also, cabin fever is setting in, even in the warm 60 temps.


     With some time to kill I cut out that funky mono extension on yesterday's fly and repurposed it. The original fly it was on (upper right) wound up looking and being better after the removal. And the removed extension was built into the below fly which would look better if the picture was better.  


     I am going to have to really, really get Bob's fly down if I want to increase my catches this spring. Depending on where you are fishing the baits will be different. River herring? Bunker? Remember that early spring bite last year wasn't just soaking bloodworms and clams on the mudflats, it was a plug, rubber, and fly bite on big adult bunker. There's nothing that does adult bunker like a Beast. Below is Bob tying the Beast Fleye. You can see more great instructional videos on the Atlantic Saltwater Flyrodders, HERE. Check out Jason Taylor's stuuf too, you know I'm a big fan, his stuff is stupid simple, it's just that I'm simply stupid and can't get his techniques down either, but I'm getting there. 

 If you're a saltwater fly rodder or tyer then consider joining this great club.